Well Service in Clemmons, NC

Homes in Clemmons on big lots past the public lines run on private wells, and until those lines arrive, the well is the water supply we keep working.

Map: Clemmons, NC in relation to GreensboroClemmonsGreensboro33.1 miAdvanceWinston-SalemWalkertownKingGUILFORDYADKINDAVIE
Town
Clemmons, NC
County
Forsyth County
From our Greensboro office
33.1 miles, straight line
Open Clemmons in Google Maps

Clemmons is a village on the Yadkin River side of Forsyth County, and its own zoning keeps large house lots for land that public water and wastewater don't reach. Studies have looked at extending service north of I-40 along Blanket Bottom Creek and south of Idols Road.

Zoning districts drawn around public water

The village plan, Community Compass 2040, adopted May 13, 2019, lists water and wastewater as a county service, run county-wide by Winston-Salem/Forsyth County Utilities. Its zoning table says who is expected to be off those lines. RS-40, with a 40,000 square foot minimum, and RS-30, at about three-quarters of an acre, are both intended for areas without public water and wastewater. RS-20 is for suburban areas where public water is available. The YR (Yadkin River Conservation) district is strictest, with a minimum lot of 3 acres, to protect the main water supply and a conservation corridor along the river.

Idols Dam, Blanket Bottom Creek, and fast growth

A large share of the planning area lies in a state WS-IV water supply watershed that protects the public intake at Idols Dam. The area holds many creeks and wetlands: Blanket Bottom Creek cuts diagonally north of I-40, Muddy Creek runs along the east side, and the Yadkin Pee-Dee River forms the border, with Tanglewood Park near the river on the west. Households in the planning area grew from 2010 to 2017, faster than in the county or the state. If you are one of the newer arrivals and this is your first house on a well, the testing schedule below is the place to start.

A testing schedule, and a card worth asking to see

NC State Extension splits testing into two rhythms. Yearly: coliform bacteria, nitrate, pH, and total dissolved solids, plus a round after any well or pump repair. Every third year: sulfate, chloride, iron, manganese, lead, and hardness. The permit side, for building or repairing a well, belongs to Forsyth County Public Health. One more tip: anyone certified for well work in this state carries a photo ID card showing the dates the certification runs, so ask to see it before the cap comes off.

I-40 west, through Winston-Salem

Point to point, the village lies 33.1 miles west of our Greensboro base. I-40 runs through it and east through Winston-Salem to Greensboro, and US 158 crosses it too. We repair and replace pumps, replace pressure tanks, answer no-water calls, fix casing and caps, and install treatment. We schedule weekdays, 8am to 5pm. Weekends, text or call (336) 613-4314.

White farmhouse with a small well house and a clothesline in the yard

ZIP code we cover around Clemmons: 27012.

What Clemmons well owners ask

Still stuck? (336) 613-4314

Does RS-40 zoning on my Clemmons lot rule out public water?

It points that way. The village plan describes RS-40 and RS-30 as districts for areas without public water and wastewater, and RS-20 as the district where public water is available. Lines don't follow zoning exactly, so ask Winston-Salem/Forsyth County Utilities about your parcel.

Will public water reach the Blanket Bottom Creek area?

The village plan notes that studies have weighed running service to land along Blanket Bottom Creek, above I-40 and west of Lewisville-Clemmons Road, and to the ground below Idols Road. It sets no timetable. Until a main actually reaches you, the well is your water.

What is the YR zoning district?

YR stands for Yadkin River Conservation, the village's most restrictive district. It requires a minimum lot of 3 acres, or 130,680 square feet, to protect the community's main water supply and keep a continuous conservation corridor along the Yadkin River.

Who issues well permits in Clemmons?

The Forsyth County Department of Public Health, through its Environmental Health Division, since the village is in Forsyth County. Permits cover well construction and repair. Replacing a pump or a pressure tank, with the well seal left closed, needs no repair permit.

How can I tell if a well contractor is really certified?

Ask to see the wallet card. Every certified well contractor in North Carolina has one, with a photo and the valid dates printed on it. The state also keeps a directory of certified contractors. Our certification number is 2453-A.

How often should I test for iron and manganese?

NC State Extension suggests every three years, along with sulfate, chloride, lead, and hardness. Test sooner if you notice new orange or black staining or a metallic taste. Coliform bacteria, nitrate, pH, and dissolved solids are worth checking every year.

Why did my water pressure drop all of a sudden?

A clogged sediment filter is the simplest cause. Beyond that, look at the switch, a pump that has lost output, a leak somewhere underground, or a well drawn low by dry weather. Note the tank gauge reading and whether the pump is running, then call.

Why does my pump kick on when every tap is closed?

Because water is leaving the system somewhere and the pump is replacing it. The usual suspects are a leak in the buried line, a spigot outside left cracked open, and a check valve that lets water slide back down the well. Every unneeded start wears the motor, so track it down.

Good references

Official pages we point homeowners to. They open in a new tab.

No water, low pressure or bad taste?

Call or text. Monday to Friday, 8am to 5pm. Saturday and Sunday: call or text.