More than a hundred years ago, the city's early water system was fed by wells too, before Asheboro moved to lakes.
A courthouse square that grew with the railroad
The State Legislature chartered the town on Christmas Day 1796, and it took form on a 50-acre tract around the courthouse square on Main Street. The rails brought the growth. A railroad from High Point by way of Randleman arrived in July 1889, the Montgomery Railroad followed in 1896, and the population nearly doubled every 10 years, from 510 in 1890 to 5,021 in 1930.
The current courthouse was finished in July 1909. Within about a decade the town had electricity and a water system fed by wells, and hosiery had joined wood products and blacksmith shops as an industry. Acme Hosiery Mills was chartered in December 1908, and the Acme-McCrary complex beside downtown, with buildings from 1909, went on the National Register of Historic Places in 2014.
Water lines spread out from that old center over the next century. A house beyond where they stopped still needs its own well, much as the town system itself did after 1909.
Lake Lucas, Lake Reese, and where the city's water goes
The city now runs on surface water. Its 2025 Local Water Supply Plan lists Lake Lucas on Back Creek and Lake Reese on the Uwharrie River as regular sources, with Lake Bunch and Lake McCrary held for emergencies. All of it is treated at the W. L. Brown Jr. plant, permitted for 12 million gallons per day. The plan counts 27,928 people served year-round, all in Randolph County, and the city sells water to Randleman and to the Seagrove-Ulah Metro Water District.
Your well has nothing to do with any of that. It draws from fractures in the rock under your own lot, and how much it gives depends on how many of those fractures the well crossed. The city's customers are spread across the Deep River, Uwharrie River, and Yadkin River sub-basins, with the Deep River taking the biggest share, but a private well answers to the rock, not the basin map.
Three well permits from Randolph County Environmental Health
Randolph County Public Health's On-Site Water Protection section evaluates sites for wells and septic systems, issues permits for both, inspects well construction and repair, and collects and interprets water samples. Its office is at 204 E Academy Street. Knowing which permit fits your job saves a phone call or two.
- New Well Permit. For a new or replacement well. A county specialist visits, sets a location that meets setbacks, and inspects the grout and wellhead, and the contractor files a Well Construction Record (GW-1). We do not build new wells, so this permit belongs to the well driller.
- Repair Well Permit. For work on an existing well, such as installing a liner, extending the casing above ground, or deepening the well. A GW-1 is filed here too, and the county recommends a bacteria sample afterward.
- Abandonment Well Permit. To close an old well for good. The contractor schedules the work and files a Well Abandonment Record (GW-30).
Pump and pressure tank work falls outside all three, since North Carolina requires no repair permit to fix or replace either one. The state does require disinfection after any pump work: chlorine at 100 parts per million or more in the well, standing at least 24 hours, then pumped out until none can be detected.
Trouble we see on wells around the county seat
Pumps that run short of water
Piedmont wells get their water from cracks in hard rock, and USGS notes that yields in these crystalline-rock aquifers are low compared with other bedrock in the region because flow is limited to fractures. A pump that outruns its well sucks air, runs hot, and fails early. We measure the water level and run drawdown and recovery testing before blaming the pump.
Orange water and iron scale
USGS says iron, manganese, and sulfate locally reach objectionable levels in Piedmont groundwater, and that high iron can come from corrosion or iron bacteria working on steel casing and fittings. Orange stains, clogged filters, and a check valve that will not seat often trace back to it. Treatment usually solves it.
Pressure that swings
When the air in the tank leaks down, the pump starts and stops with every glass of water. The fix is a pre-charge about 2 psi below the switch's cut-in pressure, or a new tank if the bladder has failed.

South on I-73 and US 220, plus office hours
Asheboro sits about 25.2 miles south of Greensboro in a straight line, and I-73, I-74, and US 220 connect the two. From the city, US 64 and NC 49 get us out to homes in the rest of the county, and Randleman, Ramseur, Archdale, Trinity, and Climax are nearby towns we also serve.
Weekdays from 8am to 5pm, we answer and book the visit. Weekends, the number is (336) 613-4314; a call or a text both reach us. Tell us what you see at the taps and at the tank, and whether the breaker has tripped. Our North Carolina water well contractor certification is 2453-A, and our founder's work as a licensed tradesman goes back to 1974.
The six core services, in plain terms
Well pump repair means finding the failed part first, and that part is often the switch, control box, or wiring instead of the pump. Well pump replacement puts in a new submersible or jet pump sized to your well. Pressure tank replacement stops short cycling and pressure swings. Emergency no-water service is what you call for when the house has no water at all. Well and casing repair covers liners and casing extensions under a county repair permit, plus caps and wellhead fixes. Well water treatment means filters, softeners, or disinfection chosen from a lab test.
ZIP codes we cover around Asheboro: 27203, 27205.