Well Service in Burlington, NC

Past the last Burlington city main, the water comes from a well in the yard, and that is where we work: pumps, tanks, casing, and water quality.

Map: Burlington, NC in relation to GreensboroBurlingtonGreensboro19.8 miElonGibsonvilleGrahamALAMANCE
Town
Burlington, NC
County
Alamance County
From our Greensboro office
19.8 miles, straight line
Open Burlington in Google Maps

Two lakes feed the city system, Lake Mackintosh on Great Alamance Creek and Stoney Creek Reservoir on Stoney Creek, and the mains reach a lot of houses, not all of them.

Two city water plants and the houses past their mains

The City of Burlington runs its own public water system with two plants. The J. D. Mackintosh, Jr. plant on Lake Mackintosh is rated at 18 million gallons per day, and the Ed Thomas plant on Stoney Creek Reservoir at 16 million. NC DEQ's 2025 water supply plan counts about 62,300 people served year-round. The city also sells water to Greensboro, Elon, Gibsonville, Haw River, the Village of Alamance, Whitsett, and the Ossipee sanitary district.

That is a big system, and it still has an edge. Alamance County leaves public water and wastewater to its cities and towns. The Census Bureau puts 63,853 of the county's 186,177 residents outside any incorporated city, town, or village. A home beyond the reach of a municipal main has to supply its own water, and that is the job of a private well.

The city does not sit in one county, either. Most of it is in central Alamance County, but the Census Bureau places a little over 2,600 residents in the Guilford County part. That changes who handles your well permit, which we cover below.

Great Alamance Creek, the Haw River, and the rock below

Both city lakes, and everyone the system serves, fall inside the Haw River sub-basin. The Haw itself rises in northeastern Forsyth County and runs about 130 miles through Guilford, Rockingham, Alamance, and Chatham counties before it joins the Deep River to form the Cape Fear. Reedy Fork crosses Guilford County and meets it in northwestern Alamance.

A private well works on different terms. It does not draw from a creek or a lake. In USGS terms, Piedmont bedrock is dense and close to watertight; water moves through it mostly along fractures, and a blanket of regolith (weathered rock and soil) lies on top. Your well is only as good as the cracks it crossed. The NC Geological Survey adds that rock types differ in how much groundwater they can deliver, and that detailed geologic maps showing diabase dikes and faults can help place more productive wells.

That geology explains a lot about an existing well. Next-door neighbors can end up with wells that behave nothing alike, and a well that keeps up in April can run short after a dry August.

What we find wrong on Alamance County wells, and why

Most problems trace to a short list of parts and conditions.

  • Storm damage. Lightning and power surges are a common cause of failed pressure switches, control boxes, and pump motors. The damage does not always show the day of the storm.
  • A waterlogged tank. Once a bladder tank loses its air charge, the pump starts and stops in quick bursts. That short cycling burns switch contacts and wears out motors.
  • A well pumped down. In fractured rock, a heavy day of watering or a long dry spell can pull the water level down to the pump. The pump runs hot and the taps spit air.
  • Black and orange buildup. By NC DHHS figures, Piedmont counties had the highest average manganese levels in North Carolina. Manganese stains black and iron stains orange, and both coat check valves, switch tubes, and filters.
  • A wellhead too close to the dirt. North Carolina rules want the casing at least 12 inches above ground, with the soil graded so runoff drains away. A cracked cap or a casing buried under years of mulch lets surface water in.

Permits and water samples through Alamance County Environmental Health

Alamance County Environmental Health runs its Wells and Water Quality program from 1946 Martin Street in Burlington. Under locally adopted rules, the program finds suitable well sites, checks setback distances from sources of contamination, inspects the cement grout on new wells, and permits well repair and abandonment.

You do not need a repair permit in North Carolina to fix or replace a pump or a tank, or for upkeep that never opens the well seal. Casing work, liners, and other repairs on the well proper are county-permitted jobs. The county also takes water samples from many wells every year and tells owners how to correct the problems it finds. If your house is on the Guilford County side of the city line, Guilford County's health department handles the permit instead.

Small well house beside a vegetable garden behind a farmhouse

Coming east on I-40 and I-85, and when to call

Burlington is about 19.8 miles east of Greensboro as the crow flies. I-40 and I-85 run together between the two cities, so that is usually our road in. From there, US 70, NC 100, and NC 87 take us to houses on the edges of the city and out into the county.

We run the office and the calendar, weekdays from 8am to 5pm. Over a weekend, a call or text to (336) 613-4314 works. Describe the symptom: nothing at all, low pressure, a pump that never stops running, or a breaker that will not stay on. Keep the pressure switch cover and the control box closed while you wait. Both carry live voltage.

Six jobs we handle on wells in and around the city

  • Well pump repair. We test power, the switch, the control box, and the wire down the well before anyone condemns a pump.
  • Well pump replacement. A submersible or jet pump sized to the well and the house, followed by the disinfection state rules require.
  • Pressure tank replacement. A new tank with the pre-charge set to match your switch.
  • Emergency no-water service. For the morning nothing comes out of the tap.
  • Well and casing repair. Cracked or short casing, failed caps, and liners, with a county permit where one applies.
  • Well water treatment. Filters, softeners, or disinfection, chosen after a lab test.

ZIP codes we cover around Burlington: 27215, 27217.

What Burlington well owners ask

Still stuck? (336) 613-4314

How can I tell if my Burlington house is on city water or a well?

Start with your bills. A water bill from the City of Burlington means the public system serves you. No bill like that? Look in the yard for a capped pipe sticking up out of the ground, and look in the basement, crawlspace, or a well house for a pressure tank and a switch. A house on a well has both.

Who permits well repairs for a Burlington address?

Alamance County Environmental Health, through its Wells and Water Quality program. It issues the permits for repairing or closing a well and checks grout on new ones. Pump and tank work needs no repair permit under North Carolina law. A house in the Guilford County part of the city goes through Guilford County instead.

Will the county sample my Burlington well?

Yes. The county's Environmental Health Division samples a large number of wells each year and gives owners guidance on correcting what it finds. Under the statewide testing program, an existing well can be sampled at any time. We are glad to sit down with the lab report and explain each line in plain words.

Which Burlington ZIP codes do you cover?

All three: 27215, 27217, and the PO Box ZIP 27216. If one of them is on your mail and a well supplies the house, we can help. It makes no difference to us if the house is inside city limits or out on a county road.

Does Burlington's city water come from wells?

No. The city treats surface water from Lake Mackintosh on Great Alamance Creek and from Stoney Creek Reservoir. Your well is another matter entirely. It draws groundwater from fractures in the bedrock under your lot, so its quality and supply can differ from the city's and from your neighbor's well.

Lightning hit near the house and now the well is dead. Is the pump gone?

Not always. A surge often takes out the pressure switch or the control box before it reaches the motor, and both can be replaced without pulling the pump. If the breaker keeps tripping, leave it off, keep the switch cover closed, and call. We check the simple parts first.

Can you put in a softener or filter system for a Burlington well?

Yes, along with iron and manganese filters and disinfection equipment. We start with a lab test, because a softener will not fix bacteria and a filter set up for iron may miss manganese. The test tells us what to install and what to leave out.

We are buying a house near Burlington with a well. What should we check?

Ask for a well inspection before closing. We look at the casing and cap, the pump, tank, and switch, and we run drawdown and recovery testing to see how the well holds up under steady use. Pair that with a lab test for bacteria and nitrates. A seller's disclosure says nothing about how the well performs.

Good references

Official pages we point homeowners to. They open in a new tab.

No water, low pressure or bad taste?

Call or text. Monday to Friday, 8am to 5pm. Saturday and Sunday: call or text.