Madison grew up where the Mayo River meets the Dan, and the town still pumps its drinking water from the Dan above the dam on Lindsey Bridge Road.
A 1972 plant on the Dan, with an expansion under way
The town water plant was built in 1972. Water enters at a raw water pump station off Lindsey Bridge Road, upstream of the Dan River dam. NC DEQ's 2025 water supply plan rates the plant at 1.566 million gallons per day and lists 2,116 people served year-round. The town sells water to the Rockingham County system and keeps an emergency connection with Mayodan, and the same plan reports an expansion of the plant under construction.
History runs along the water here. State lawmakers planted the town at the river fork in 1815, and well into the 1800s, bateaux, the flat cargo boats of the day, floated goods down the Dan toward markets in Richmond and Petersburg. Tobacco came next, with 44 plug tobacco factories by the later 1800s, and the first textile company opened in 1915. River water has served the place for a long time. The wells on the edges of town tap something else entirely: groundwater held in cracked Piedmont rock.
Lot sizes from 7,000 square feet to nearly 10 acres
Madison's Land Use Plan, adopted in May 2004 and readopted in 2013, found residential lots inside town limits ranging from about 7,000 square feet to almost 10 acres. Out in the town's extraterritorial jurisdiction, many residential parcels ran anywhere from 5 acres to 10 acres. The zoning ordinance, revised in 2005, covers both the corporate limits and that outer ring.
The plan singled out one stretch: the ETJ ground lying northeast of the confluence, out Water Street and Dan Valley Road. At the time it was mostly large-lot home sites on private wells and septic systems, and the town didn't expect to run wastewater service there soon. The same plan called individual septic systems the most common wastewater method in unincorporated Rockingham County. Those are 2004 observations, so treat them as a starting point, not a current count.
One more local wrinkle. Homes in the Hunter-Decatur Street and Academy Street historic districts need a Certificate of Appropriateness before exterior work, so check with the town before building anything new around a wellhead there.
Why neighbors' wells can behave so differently
Wells on adjoining lots can deliver wildly different amounts of water. The reason is in the rock. Unweathered Piedmont bedrock is close to watertight, and USGS points out that fractures are its only working openings, with saprolite and soil, looser and more porous, lying on top. A well that crossed several good fractures keeps up. One that hit only a thin crack may struggle through every dry summer.
The NC Geological Survey makes a related point for the whole Piedmont: some rock types hold more groundwater than others, and a detailed geologic map that shows diabase dikes and faults can steer a new well toward better ground. For an existing low-yield well, the options are testing and rehabilitation. A drawdown and recovery test measures how fast the water comes back. Hydrofracturing, which pushes water at high pressure into the rock to open fractures, can raise the yield of some wells.
What state rules require once a well has been opened
North Carolina treats every pump job as an opening of the well: whoever repairs, tests, maintains, or installs the pump has to disinfect the well afterward. The rule sets the dose, too: no weaker than 100 parts per million of chlorine, standing in the well for at least 24 hours. After that the well gets pumped out until a test finds no chlorine left, and only then does it go back to serving the house.
Casing rules travel with every repair. No repair may leave the top of the casing lower than 12 inches above the surrounding ground.
Permits for well construction and well repair come from the Rockingham County Health Department in Wentworth. Replacing a pump or a tank, or upkeep that keeps the well seal shut, needs no repair permit.

US 220, the road north from Greensboro
As the crow flies, the town lies about 23.4 miles north of Greensboro. US 220 is the main road between them, and US 311 and NC 704 also pass through, which covers most of the country around the river junction.
Weekday appointments run from 8am to 5pm. On the weekend, (336) 613-4314 takes texts and calls.
Our six core services for western Rockingham County
Most visits fall under one of six jobs. Well pump repair finds the failed part, whether that is a switch, a capacitor, a splice, or the motor. Well pump replacement puts a correctly sized pump back down the well and finishes with the required disinfection. Pressure tank replacement ends short cycling and the switch wear that comes with it. Emergency no-water service is the call to make when nothing comes out. Well and casing repair fixes the top of the well, where most contamination starts. Well water treatment answers stains, odors, and hardness with equipment chosen from a lab report.
ZIP code we cover around Madison: 27025.