Well Service in North Carolina

In North Carolina we work across eight counties around Greensboro, plus two towns just past them.

Map of the Piedmont Well and Water Services areaGreensboroHigh PointWinston-SalemStokesdaleOak RidgeReidsvilleEdenAsheboroMadisonDanvilleALAMANCEDAVIDSONGUILFORDRANDOLPHYADKINPATRICKCHATHAMDAVIEROWANSTOKESFRANKLINCASWELLPITTSYLVANIASURRYHALIFAXHENRY

Most wells here are drilled into Piedmont bedrock, and the rules come from the state and are enforced by county health departments. Here is how both work, in plain terms.

Eight North Carolina counties and two towns past them

Guilford County is home base. Around it, Forsyth lies to the west, Alamance to the east, and Randolph and Davidson to the south and southwest. Rockingham, Caswell, and Stokes run along the top of the area, each partly bordered by Virginia. Past those eight, we also cover Siler City in Chatham County and Advance in Davie County.

The counties are not alike. Census Bureau figures put the large majority of Caswell County residents outside its incorporated towns, and most Rockingham residents too. In Alamance the share is closer to a third, and the county itself provides no public water; the towns do. Town limits are not water lines, but a county with most of its people outside them tends to have plenty of wells.

North Carolina well rules that reach the homeowner

Permits. Under state law, building or repairing a private drinking water well takes a permit from the local health department first. Once permitted work is done, the department inspects it, and the well stays out of service until a certificate of completion is issued. Pump and tank work is the exception: repairing or replacing either one needs no repair permit, and the same goes for maintenance that never opens the well seal. Session Law 2026-32, signed July 2, 2026, made the state's private well program the single permitting and inspection program across North Carolina, with county health departments enforcing it.

Certified contractors. The state also says who may do the work. Well contractor activities need a certified well contractor present, and that list covers opening the well seal, the disinfection required after pump work, raising casing, hydrofracturing, and well repair. Certification comes from the Well Contractors Certification Commission under NC DHHS. Our certification is 2453-A.

Disinfection. When a pump in a well is repaired, tested, maintained, or installed, the well has to be disinfected afterward. The chlorine dose must reach at least 100 parts per million and stand a full day or longer, and the well is pumped until the chlorine is gone before anyone uses it.

Casing height. The top of the casing must sit 12 inches or more above land surface, a repair cannot leave it any lower, and the ground beside it should slope so water runs off.

New-well testing. The local health department tests every new well within 30 days of its certificate of completion. The list is long: arsenic, lead, manganese, nitrates, bacterial indicators, and more than a dozen others.

When North Carolina says to test

After that first test on a new well, North Carolina requires no more. From then on, testing is the owner's call, and NC DHHS suggests a calendar:

  • Yearly: total and fecal coliform bacteria.
  • Every other year: heavy metals, nitrates, nitrites, lead, and copper.
  • Every five years: pesticides and volatile organic compounds (yearly when a specific pesticide is used nearby).
  • After any repair or replacement of a well component, and after flooding.

NC DHHS also lists the usual problems in North Carolina wells: too much lead, arsenic, iron, or manganese, low pH, and harmful bacteria. County health departments take samples, and so do certified private labs. While you are at it, look the wellhead over once a year for cracks or openings.

Piedmont rock and what it does to well water

Most wells in this part of the state are drilled into hard rock. The USGS describes the bedrock under the Piedmont as dense and nearly impermeable. Water moves through fractures, the only openings that count in unweathered rock. On top lies a blanket of looser material the USGS calls regolith: saprolite (decomposed rock), soil, and other loose deposits. Water moves through that layer more easily than through the rock below.

That is why two wells on neighboring lots can behave so differently. Each depends on the fractures it happened to cross. A USGS fact sheet adds that well yields in this kind of crystalline rock run low next to other bedrock in the region, since flow is held to the fractures.

The rock shapes the chemistry too. According to the USGS, iron, manganese, and sulfate climb to objectionable levels in some places, and corrosion or iron bacteria working on steel casing and fittings can add iron of their own. NC DHHS found the highest average manganese in the state in Piedmont counties: 0.09 mg/L, with 24 percent of wells above the 0.05 mg/L aesthetic standard. Guilford and Caswell are named among the highest. Treatment usually handles both metals once a lab test shows how much is there.

Getting hold of us in North Carolina

Weekday hours at the Greensboro office run 8am to 5pm, Monday to Friday, and we keep the schedule. Weekends, call or text (336) 613-4314. Give us the town, describe what the water is doing, and say whether the pump breaker tripped. From there, we set up the visit.

Questions well owners ask

Still stuck? (336) 613-4314

Who issues well permits in North Carolina now?

The health department of the county the well is in. Since Session Law 2026-32 was signed on July 2, 2026, the state's program has been the only permitting and inspection program for private drinking water wells, and local health departments may not enforce permit rules of their own. County staff still handle applications, inspect the work, and apply the state standards.

Should I keep the certificate of completion for my well?

Yes. After permitted construction or repair, the well cannot be used until the health department issues its certificate of completion. Keep it with the well's construction record, any repair records, and your lab results. A buyer, a lender, or the next contractor will want to see what was done and when, and the paper saves guesswork years later.

Is a chlorine smell normal after the pump is replaced?

Yes, for a short while. North Carolina rules require disinfecting the well after pump repair or installation, with a dose of at least 100 parts per million left a day or more, and the well is pumped until chlorine no longer shows up before it goes back in use. A trace can linger in the house lines briefly. A strong smell means more flushing is needed.

Can I ask to see a well contractor's certification card?

Yes, and it is a fair thing to ask before anyone breaks the well seal or extends casing. Every certified well contractor in North Carolina carries a photo card listing the dates the certification is good for. If you want to double-check, the Well Contractors Certification Commission at NC DHHS has a search for certified contractors on its website.

My casing barely clears the grass. Does that break a rule?

It may. The state's construction rules want the casing top a foot or more above land surface, 12 inches at minimum, and they bar any repair or alteration that leaves the wellhead lower. The ground around it should slope away so rain drains off. Low casing lets surface water, insects, and runoff reach the cap. Extending casing above ground is work for a certified contractor.

Does the state test my well for me?

Only once, when a new well is finished: the local health department tests it within 30 days of the certificate of completion. After that, testing is your decision. Many county health departments will sample an existing well, and certified labs do too. Davidson County's Water Supply Program, for example, takes samples to test for bacteria, chemicals, pesticides, and petroleum.

Do I need to test after a flood even if the water looks clear?

Yes. NC DHHS says to test after flooding, since a submerged wellhead can let contaminants in, and clear water proves nothing about bacteria. Leave the pump's electricity off until the water goes down. NC DHHS also strongly suggests letting the county health department or a licensed well driller handle shock chlorination of a flooded well before the retest.

How far does a well have to be from a septic system in North Carolina?

Under state setback rules, a private well needs at least 100 feet of separation from a septic system. For a single-family home on a lot too small for that, the distance can drop to 50 feet. The well must also stand at least 25 feet from the house. These numbers matter most when a well is being located, and the county health department checks them when it permits the site.

Good references

Official pages we point homeowners to. They open in a new tab.

No water, low pressure or bad taste?

Call or text. Monday to Friday, 8am to 5pm. Saturday and Sunday: call or text.