Well Service in Siler City, NC

Siler City's 2024 land use plan says it plainly: the town's rural residential areas will be served mainly by well and septic.

Map: Siler City, NC in relation to GreensboroSiler CityGreensboro30.4 miLibertyRamseurJulianClimaxALAMANCERANDOLPHCHATHAM
Town
Siler City, NC
County
Chatham County
From our Greensboro office
30.4 miles, straight line
Open Siler City in Google Maps

Farms and forest cover most of the planning area around town, and many of the homes out there run on private wells. That is the work our well service Siler City visits are for.

What the 2024 land use plan says about wells

The town adopted its land use plan on July 15, 2024. The plan's study area takes in the town limits and the extraterritorial jurisdiction, about 67.3 square miles, and most of that land is forest or farmland. It says Rural Residential areas will primarily be served by well and septic systems, with wastewater extensions considered only to fix failing septic tanks or to allow conservation subdivisions. The rural parts of the ETJ are expected to stay mostly low-density, larger-lot single-family homes.

Older houses, mobile homes, and the wells behind them

Inside town limits, more than half of the housing units were built before 1980 and very few since 2010, according to Census estimates cited in the plan, and mobile homes make up a real share. Those numbers cover the town proper, but the age of a house is a fair clue to the age of its well wherever it sits. EPA advises owners to check for cracked, corroded, or damaged casing, a broken or missing cap, and settling or cracking around the surface seal, and never to cut the casing off below the ground.

Rocky River country and Chatham County Environmental Health

The Rocky River runs northwest to southeast just east of US 421, and most of the planning area drains to it or to Loves Creek. The public water system draws from the river's Upper and Lower reservoirs and treats it at a plant permitted for 4.0 million gallons per day. Private wells are a different matter. Permits and sampling for them fall to Chatham County Environmental Health, listed on East Street in Pittsboro. North Carolina requires a health department permit to build or repair a private well, and NC DHHS warns that a cracked or unsealed well can let coliform bacteria in.

The US 421 route and our hours

The town sits about 30.4 miles southeast of Greensboro in a straight line, and US 421 links the two, running north into Guilford County. Liberty, Ramseur, Julian, Climax, and Asheboro are the closest towns we also serve. Weekday hours run 8am to 5pm, and on weekends you can call or text (336) 613-4314.

Small well house beside a vegetable garden behind a farmhouse

ZIP code we cover around Siler City: 27344.

What Siler City well owners ask

Still stuck? (336) 613-4314

Are homes outside Siler City on wells?

Many are. The town's 2024 land use plan says its Rural Residential areas will be served primarily by well and septic, and that rural parts of the extraterritorial jurisdiction rely on septic instead of public wastewater service. If your house is out there, the well is yours to maintain.

Who handles well permits around Siler City?

Chatham County Environmental Health, which the state's environmental health directory lists in Pittsboro. A health department permit is needed to build or repair a private well. Pump and tank changes are the exception: no repair permit.

What ZIP code is Siler City?

27344. We work on wells all over that ZIP, inside town limits and out through the ETJ, farm lots included, and US 421 is our road down from Greensboro, about 30.4 miles as the crow flies.

Does Siler City's public water come from wells?

No. The public system draws from the Rocky River, using an Upper and a Lower reservoir, and treats the water at a plant permitted for 4.0 million gallons per day. Private wells around town pull from bedrock fractures instead, a different source entirely.

My house is old and so is the well. What should I check first?

The wellhead. The casing should end at least 12 inches above the ground, the cap should be tight and intact, and the soil should slope away. After that, test the water. Worn caps and cracked casing are where bacteria problems tend to start.

Can you work on a well that serves a mobile home?

Yes. A well is a well, whatever house it feeds. With a mobile home, the pressure tank often sits in a small well house or under the home, where cold weather and tight access can complicate things. We check the tank, switch, and wiring the same way.

Why is my water pressure fine in the morning but weak by evening?

That pattern points to the well more than the pump. A low-yield well can keep up early, then fall behind as the day's use draws the water level down. Drawdown and recovery testing shows how much the well can give, and rehabilitation can sometimes raise it.

Do you work on septic systems?

No. We work only on the water side: wells, pumps, tanks, switches, casing, and treatment. With a well and a septic system on the same lot, though, we will tell you if the well's condition or location looks like a contamination risk.

Good references

Official pages we point homeowners to. They open in a new tab.

No water, low pressure or bad taste?

Call or text. Monday to Friday, 8am to 5pm. Saturday and Sunday: call or text.