Well Service in Winston-Salem, NC

We work on the Winston-Salem houses that are not on city water: a private well, a pressure tank, and a pump the owner is responsible for.

Map: Winston-Salem, NC in relation to GreensboroWinston-SalemGreensboro25.3 miWalkertownClemmonsKingFORSYTHGUILFORDYADKINDAVIE
Town
Winston-Salem, NC
County
Forsyth County
From our Greensboro office
25.3 miles, straight line
Open Winston-Salem in Google Maps

Most addresses in the city get their water from Winston-Salem/Forsyth County Utilities, drawn from the Yadkin River and Salem Lake. If you need well service in Winston-Salem or on the rural Forsyth County land around it, start here.

Muddy Creek drew the city, and it still marks the rural line

Moravian settlers chose their site in 1753, on the three forks of Muddy Creek, after buying a huge tract of what became Forsyth County. Nearly the whole modern city grew up on that ground. Today the county's Legacy 2030 plan uses the same creek to draw a line: land outside the Muddy Creek basin is treated as rural, because of the terrain and because gravity wastewater lines can't be extended there economically.

That Rural Area sits mostly outside the incorporated towns, in two pieces. One is the western end of the county along the Yadkin River. The other is the Belews Creek area to the northeast. City customers are served by WSFC Utilities, whose three plants can treat 91 million gallons daily between them. If yours is one, the pump, the tank, and the casing are yours to keep running.

Steep ground, poor soils, and lots measured in acres

Legacy 2030 cites a GIS study that found that only about a quarter of the county's Rural Area could be easily developed, even if wastewater service were available. Steep slopes, poor soils, streams, and existing development rule out the rest.

For a well owner, slope shows up at the wellhead. State construction rules want the soil around the casing shaped so rain sheds away from the well. On a hillside lot, that grading washes out and settles over the years, and a well that once sat high can end up collecting runoff.

The county also pushes rural land toward big parcels. Its revised Planned Residential Development rules require close to half of a site in the RS-30, RS-40, and AG districts to stay open space. Big parcels also put more yard between wellhead and kitchen, and a leak in that buried run can hide for months.

Six protected watersheds on the county map

Legacy 2030 lists six protected water-supply watersheds in Forsyth County: the Yadkin River, Salem Lake, Kernersville Lake, Abbotts Creek, Lake Brandt, and Randleman Lake. State rules limit how densely the land in each one can be built on.

Those limits protect lakes and intakes, not private wells, but the logic carries over. In USGS terms, the rock beneath Forsyth County is dense, and water moves through its cracks, with a blanket of soil and rotten rock on top. Whatever soaks into the ground near a wellhead has a path down. A tight cap, sound casing, and clean ground around the well do for your water what watershed rules do for the city's lakes.

What tends to fail on a well out past the city mains

  • Low water in dry spells. A fractured-rock well refills only as fast as its fractures deliver. After weeks without rain, the level can sink to the intake, and the motor loses the water that cools it.
  • Storm damage. Lightning and power surges take out control boxes, pressure switches, and motors.
  • A tired pressure tank. With its air cushion gone, a tank leaves the pump stuttering, which chews up switch contacts and motor windings.
  • Scale. Iron and manganese settle as orange and black crust on check valves, pump intakes, and pipe walls until the flow chokes down.

On the Rural Area's sloped lots, add one more: a wellhead at the low side of the yard that takes on runoff after hard rain.

White farmhouse with a small well house and a clothesline in the yard

Forsyth County Public Health: permits, inspections, and samples

Private wells in this county fall under the Department of Public Health's Environmental Health Division, at 799 North Highland Avenue in Winston-Salem. For a new well, the owner applies and meets county staff on the site to have the permit issued, and the county recommends having the certified well contractor there to help pick a workable spot. Once the well is built, an environmental health specialist checks the grout and the wellhead, down to the tags and the hose bib, before a water sample is scheduled.

An older well can be tested too. You request an existing well inspection and a sample. The well has to meet the rules before the county will sample it, and any violation found must be corrected within 30 days.

A lot of well work needs no county paperwork. Pump and tank swaps skip the permit desk entirely under state law, as does upkeep that never cracks the well seal.

I-40 and US 421 out of Guilford County

Winston-Salem sits about 25.3 miles west of Greensboro as the crow flies. I-40 and US 421 both run from Guilford County straight through the city, so either one puts us on the west side of the Triad.

Monday through Friday, the office line is open from 8am until 5pm. Saturdays and Sundays, a text or a call to (336) 613-4314 gets the ball rolling. Mention the number on the tank gauge and any tripped breaker; that pair of clues decides which parts ride along.

The six jobs we handle at Forsyth County wells

Well pump repair works from the panel outward, so the breaker, pressure switch, and control box get checked before the well is opened. Well pump replacement comes in when the motor or the pump end has truly worn out, and it ends with the disinfection state rules require after pump work. Pressure tank replacement cures the rapid on-off cycling a waterlogged tank causes. Emergency no-water service covers a house that woke up with dry taps. Well and casing repair covers cracked casing, loose caps, and liners. Well water treatment handles the iron, manganese, and odor problems a lab test turns up.

What Winston-Salem well owners ask

Still stuck? (336) 613-4314

Do I need a Forsyth County permit just to swap out my well pump?

No. North Carolina lets a pump or pressure tank be fixed or changed out with no repair permit, so long as the well seal stays shut. Repairs to the well proper, the casing for instance, are another story, and Forsyth County Public Health may need to issue a permit. You hear from us about that before a wrench comes out.

Can I go by the city's water quality report if my house is on a well?

No. That report covers water WSFC Utilities treats from the Yadkin River and Salem Lake. Your well's water rises out of cracked rock beneath your yard and can differ a great deal from anything the utility treats. What your tap delivers shows up only in a lab report on your own well, and NC DHHS advises checking for bacteria each year.

Will the county test an older well, or only new ones?

Older wells can be tested. Request two things from Forsyth County: an existing well inspection and a sample. The well has to meet current rules before staff will sample it, and problems found must be corrected within 30 days, so it pays to have the wellhead in good shape first. We can look it over before you make that call.

Do you work on the Yadkin River side of the county and around Belews Creek?

Yes. Those are the two pieces of Forsyth County that Legacy 2030 marks as Rural Area. When you call, give us the road, the nearest crossroads, and what the water is doing. We plan the trip from Greensboro around that, and we bring the parts your symptoms point to.

On what schedule should a Forsyth County well be tested?

The NC DHHS schedule runs in three tiers: every year, coliform; every other year, heavy metals along with nitrates, nitrites, lead, and copper; every fifth year, pesticides and volatile organic compounds. A repair or a flood calls for another round of testing. We collect samples and go over the lab report with you in plain language.

My sinks have started showing black stains. What causes that?

Dark stains like that are the calling card of manganese. By NC DHHS figures, the state's highest average manganese readings came from Piedmont counties, and the agency's aesthetic limit exists to head off just this kind of mark, along with a bitter, metallic flavor. A lab test confirms it and shows whether iron is mixed in. Treatment usually solves excess iron and manganese.

What makes a pump click on and off every few seconds?

Short cycling, and the usual culprit is a tank that has lost its air. Without that cushion, the pump reaches cut-out pressure almost at once, shuts off, and starts again a moment later. Every start wears the switch and the motor. Cut back on water use and call before the pump burns itself out.

What can I safely check before calling about no water?

Check the breaker that feeds the pump. If it tripped, reset it once, and if it trips again, leave it off. Write down what the pressure tank gauge reads. Think back to any storm or power outage. Leave the pressure switch cover, the control box, and the well cap alone, since they carry line voltage.

Good references

Official pages we point homeowners to. They open in a new tab.

No water, low pressure or bad taste?

Call or text. Monday to Friday, 8am to 5pm. Saturday and Sunday: call or text.