A trade started in 1974, now narrowed to wells
1974 marks when Floyd started work as a licensed tradesman, not when the company opened its doors, and he has kept a license ever since. He founded the company himself and still owns it.
Over time the work narrowed to one thing: the private well and everything attached to it. That means the pump that lifts the water, the tank and controls that hold it under pressure, the casing and cap that keep the well sealed, and the water that comes out at the end. Today that is all the company does.
Long years in the trades show up in the order of the work more than in anything we could say about them. Power and controls get checked before a pump is condemned. The casing gets a look whenever the well is open. And the homeowner hears what was found, with the readings to back it up, before anything is replaced.
What the name means
The name says what the company does, and what it leaves out.
Piedmont is the region, the rolling country between the coastal plain and the mountains, where the wells we work on are drilled into hard rock and draw their water from fractures in it. Well means existing wells and their pumps, tanks, switches, casing, and liners. Water means what comes out of them, which is why testing and treatment sit right beside pump work instead of trailing behind it.
It does not promise new wells, because we do not drill them. It does not suggest work inside the house, because we do not do that either.
How a small office runs the schedule
This is a small independent company with its base in Greensboro, NC 27407, and our office manager runs the office and the calendar. When you call, you will be asked your town, what the water is doing, and what you have already checked. If your question is technical, the office manager gets the right person on the phone and books your visit directly with that person.
The office keeps weekday hours, 8am to 5pm Monday through Friday. Weekends, call or text (336) 613-4314. Messages from the contact form land in the same office.
Being small has a plain upside: there are fewer hands between your call and the person who shows up at your well.
Jobs we take, and jobs we turn down
We take on what an existing home well needs, from the pump at the bottom to the treatment at the end of the line, and the no-water calls that come in between.
We turn down new wells, since we do not drill them, and anything inside the house past the pressure tank and treatment equipment. We also will not replace a part on a guess, and we will not ask a homeowner to open a switch cover, pull a well cap, or keep resetting a tripped breaker to save us a trip. The reverse holds too: when a part is still good, we say so. A tank with life left in it, or a pump that only needed a new switch, stays right where it is.
When a job falls outside those lines, you will hear it on the first call, along with the kind of contractor to look for if we can point you to one.
The licenses in plain words
North Carolina water well contractor certification 2453-A. Under North Carolina rules, a certified well contractor has to be on hand for well work: building, repairing, altering, or closing a well, breaking the well seal, disinfecting after pump work, extending casing, and hydrofracturing. The commission that certifies contractors sits under NC DHHS, and each certified contractor carries a card with a photo on it and the dates the certification covers. You can ask to see it.
Virginia water well license 2719001436. On the Virginia side, the state requires a license and certification for anyone doing construction, repair, or alteration work on a private well. This license is what lets us work on wells in Danville, Ridgeway, Martinsville, and the counties around them.
Bonded and insured. The coverage amount appears with the licenses above.
The other North Carolina licenses listed above come from Floyd's years in the trades. They are part of his background, not services we sell.
