If your question is not here, call or text, and tell us what your water is doing.
Well Questions and Answers
Straight answers to the questions homeowners ask most about well service, grouped by topic. The first group covers hours, service area, and what we do and do not work on.
The questions we hear most
Still stuck? (336) 613-4314
Calling us
What are your hours?
Our office hours are Monday to Friday, 8am to 5pm. On Saturday and Sunday, call or text [piedmont_phone]. On a weekend, a text is often the easiest way to start. Tell us what the water is doing, whether you can hear the pump running, and the address of the well. Those details help us talk through the problem with you and figure out what comes next.
Do you cover my area?
We work across the Piedmont Triad in North Carolina and the northern Piedmont counties around it. In Virginia, we cover Danville, Ridgeway, and Martinsville. If your home sits near the edge of that area and you are not sure which side of the line you fall on, call or text with your town or ZIP code. We will tell you plainly whether we can help.
Do you drill new wells or work on the pipes inside the house?
No to both. We do not drill new wells, and we do not work on the water lines or anything else inside the house. Our work is the well you already have: the pump, the pressure tank and switch, the controls and wiring, the casing and cap, and the water that comes out of it, including testing and treatment. What runs inside the walls belongs to a different trade.
What licenses do you hold?
Our founder has been a licensed tradesman since 1974. For well work, we hold North Carolina water well contractor certification 2453-A and Virginia water well license 2719001436. North Carolina requires a certified well contractor for well contractor work, and Virginia requires anyone who builds, repairs, or alters a private well to be licensed and certified. Asking any company for its numbers is fair. Ours are listed here so you can check them.
Can I talk to someone technical before I book?
Yes. Our office manager answers the phone, and for a technical question gets the right person on the line. Your visit can then be booked directly with that person.
Do you have a referral program?
Yes. Send someone on a well our way, and when they give us your name, you get a $100 gift certificate toward a future job with us. If they write to us instead of calling, the contact form has a box for your name.
Pumps and pressure
My water pressure is weak, but I still have water. What usually causes that?
A clogged sediment filter is the first thing to check, and the easiest to overlook. After that, the usual causes are a pressure switch set lower than you are used to, a tank whose air charge has leaked down, a pump that is wearing out, or a well that refills slowly. Note what the tank gauge shows at the moment the pump kicks on and again when it shuts off. Those two numbers tell us where to begin.
How can I tell whether I have a submersible pump or a jet pump?
Go look for the pump. If a motor and pump body sit above ground, in a basement, crawlspace, or well house, you have a jet pump. If all you find is the pressure tank, the switch, and a pipe coming in from the yard, the pump is down in the well, which makes it a submersible. A small control box mounted near the tank usually means a three-wire submersible. Two-wire pumps do without one.
What shortens the life of a well pump?
Age gets every pump eventually, but some things speed it along. Lightning and power surges damage pumps and control boxes. Short cycling, the rapid on-and-off you hear from a waterlogged tank, wears out the motor and the switch. Running with too little water around it overheats a submersible, which depends on moving water to stay cool. Grit and sediment wear the internal parts. Fixing a waterlogged tank or adding dry-run protection spares the pump a lot of that wear.
Does the well have to be disinfected after pump work?
In North Carolina, yes. State rules require anyone who repairs, tests, maintains, or installs a pump in a water supply well to disinfect the well afterward. The chlorine has to reach at least 100 parts per million and stay in the well for 24 hours or more, and the well is then pumped until no chlorine is detected. Virginia rules also require disinfection after work inside the casing. Plan for a day without drinking water from the tap and a follow-up test.
Tanks and switches
Why does my pump keep clicking on and off every few seconds?
That is short cycling, and the usual culprit is a tank whose air cushion has leaked away. A tank with a healthy air charge lets the pump run for a good stretch and then rest. A waterlogged tank has no cushion, so pressure jumps to the shutoff point in seconds and falls just as fast. A torn bladder, a leaking check valve, or a switch problem can do the same thing. Since short cycling wears out pumps, call sooner rather than later.
What does a pressure tank actually do?
It stores water under pressure, which lets the pump rest through small draws instead of starting for each one. In most modern tanks, a bladder or diaphragm separates the water from a cushion of air. As the pump fills the tank, the air compresses. When you use water, that air pushes it out until pressure falls to the switch's cut-in point and the pump starts again. The air side is pre-charged about 2 psi below that cut-in pressure.
What do numbers like 30/50 or 40/60 on a pressure switch mean?
The first number is the cut-in pressure, where the switch starts the pump. The second is the cut-out pressure, where it shuts the pump off. A 30/50 switch starts the pump at 30 psi and stops it at 50 psi. Common settings are 20/40, 30/50, and 40/60. Turning the setting up is not a cure for weak pressure on its own, because the pump has to be able to reach the new cut-out and the tank's air charge has to be reset to match.
Can I adjust or clean my pressure switch myself?
Please do not. The terminals inside the cover carry live line voltage, and they can still be live if the wrong breaker got switched off. Turning the adjustment nuts also changes how hard the pump works, which can shorten its life if the pump and tank are not matched to the new setting. If the switch chatters, buzzes, smells hot, or will not start the pump, keep the cover on and call us.
Casing, caps and permits
How far above the ground should my well casing stick up?
At least 12 inches. North Carolina and Virginia rules both set that minimum for the top of the casing, and under North Carolina rules no repair may leave the wellhead any lower. The ground around it should slope away so rain and runoff move off instead of pooling at the base. Short casing or a wellhead down in a pit can usually be raised. That work may need a permit, depending on the state and the job.
My well cap is cracked or loose. Does that really matter?
Yes. The cap keeps insects, mice, leaves, and surface water out of the well. NC DHHS says coliform bacteria and E. coli can get into well water when a well is poorly built, cracked, or unsealed. Virginia Cooperative Extension cautions that disinfecting a well does little good for long if a loose cap or cracked casing stays as it is, because the bacteria return. Replacing a cracked cap is usually a small job, and under Virginia rules swapping in an equivalent cap is not a well alteration.
Do I need a permit to replace my well pump or pressure tank?
In North Carolina, no repair permit is needed to repair or replace a well pump or tank, or for maintenance that does not involve breaking or opening the well seal. Building or repairing the well itself does need a permit from the county health department. In Virginia, replacing a pump is not considered a well alteration, while constructing, altering, deepening, or abandoning a well requires a written permit. When a job falls close to the line, the health department has the final word.
What is a well liner, and when does a well need one?
A liner is a pipe set inside the old casing or the open hole to seal off a damaged section, keep loose rock and sediment out, or stop shallow water from getting in. North Carolina rules allow NSF-approved PVC pipe rated at 160 psi as a liner, with the space around it completely filled with cement grout. Under those same rules, broken or punctured casing has to be repaired or replaced, or the well permanently abandoned, so a liner is often what keeps a damaged well in service.
Water quality
How many times a year should a private well be tested?
NC DHHS recommends a yearly test for total and fecal coliform bacteria, a test every two years for heavy metals, nitrates, nitrites, lead, and copper, and a test every five years for pesticides and volatile organic compounds. Test for a specific pesticide yearly if it is used nearby. Test again whenever a part of the well is repaired or replaced, and after flooding. The Virginia Department of Health says yearly testing is a good idea and that testing is the homeowner's responsibility.
What do orange, black, or blue-green stains mean?
Each color points somewhere different. Orange and rust-brown stains come from iron. Black or dark brown stains usually mean manganese, and in NC DHHS figures, Piedmont counties had the highest average manganese levels in the state. Blue-green stains on copper suggest water with low pH, which can eat away at copper pipe over time. A lab test tells you what is there and how much, and that is what decides the right treatment.
My water tested positive for coliform. Is my well ruined?
Usually not. A positive total coliform result means something is letting germs from the surface into the water, and the job is to find that path. Common suspects are a loose or cracked cap, damaged casing, poor grading at the wellhead, or a recent repair that opened up the well. Fix the way in, shock chlorinate the well, and retest. If E. coli also shows up, switch to bottled water for drinking and cooking until a retest comes back clean.
Can you explain what my lab report means?
Yes. Lab reports list each result beside a limit, and the units, flags, and abbreviations are hard to follow if you do not read them every day. We will go through yours line by line in plain language: what is fine, what is over a limit, what only affects taste or staining, and what needs action. Picking a treatment system works best from that report and a conversation, not from a guess at the hardware store.
Buying or selling a home
What should a well inspection cover before I buy a house?
At a minimum, the wellhead, casing height, and cap; the pressure tank, switch, and wiring; how the pump performs; and a drawdown and recovery test to see how the well handles steady use. Pair that with a lab water test. The yearly checkup recommended by the National Ground Water Association covers a flow test, pump motor performance, the tank and switch, an equipment inspection, and a coliform and nitrate test, which also makes a solid checklist for a purchase.
Which water tests make sense when a house with a well is for sale?
Start with total coliform and E. coli, nitrate and nitrite, and pH. Add arsenic, lead, manganese, and iron, since NC DHHS lists those among the problems found in many North Carolina wells. For a fuller picture, use the panel the state requires on new wells as a guide. It adds metals such as barium, cadmium, chromium, copper, mercury, and selenium, along with fluoride and sodium. Have a certified lab or a trained sampler collect the water.
How do I find out whether a well was permitted?
Call the environmental health office at the county health department and give them the property address or parcel number. North Carolina counties have had to run permitting, inspection, and testing programs for any well constructed, repaired, or abandoned from July 1, 2008, onward, so a newer well should have a file. Older wells may have little or nothing on record, which is common and not a problem by itself. In Virginia, permit applications go to the district or local health department.
I am selling my house. What can I do before the buyer's well inspection?
Get ahead of the obvious findings. Replace a cracked cap, pull mulch and soil back from the casing, and fill low spots where water stands near the wellhead. Gather whatever records you have: the permit, pump and tank install dates, past lab results, and repair receipts. A water test of your own means no surprises. If something needs fixing, handling it before you list usually goes better than sorting it out under a contract deadline.
Good references
Official pages we point homeowners to. They open in a new tab.
- NC law on well permits and testingNorth Carolina General Assembly, G.S. 87-97
- NC well construction rules (PDF)NC DHHS (rules of the NC Environmental Management Commission), 15A NCAC 02C .0100
- Testing your well water: common questionsNC DHHS, Occupational and Environmental Epidemiology Branch
- Virginia well permits and inspectionsVirginia Administrative Code (Virginia General Assembly LIS), 12VAC5-630-220
No water, low pressure or bad taste?
Call or text. Monday to Friday, 8am to 5pm. Saturday and Sunday: call or text.