Well Service in Kernersville, NC

Kernersville homes on big lots past the public water lines run on private wells, and here is the ground under them, the Forsyth County rules, and the repairs we make.

Map: Kernersville, NC in relation to GreensboroKernersvilleGreensboro16.1 miColfaxWalkertownOak RidgeHigh PointFORSYTHGUILFORD
Town
Kernersville, NC
County
Forsyth County
From our Greensboro office
16.1 miles, straight line
Open Kernersville in Google Maps

The town's zoning code is blunt about it: its large-lot districts are for homes where public water and wastewater don't reach.

Reading the town zoning map for private wells

The Unified Development Ordinance, adopted April 2, 2024, spells out who is expected to be off the public system. RS-40 calls for a 40,000 square foot minimum lot and is meant for single-family homes on large lots without access to public water and wastewater. RS-30 works the same way at 30,000 square feet, roughly three-quarters of an acre. The AG district also starts at 40,000 square feet and is aimed at farms and scattered homes on large tracts, not small-lot subdivisions.

Where public or community water and wastewater are not available, the ordinance hands lot sizing to the Public Health Department. Whatever it sets can't go under 20,000 square feet, or under the district's own minimum if that is larger.

The new town plan adopted August 26, 2026 points the same way. Its Rural Residential category, for parcels over 5 acres, generally applies where public water and wastewater are not available. The town does not run its own water plant. Instead, the plan has it partner with Winston-Salem/Forsyth County Utilities on water infrastructure and wastewater service capacity.

Abbotts Creek, the valleys, and wells on low ground

That 2026 plan notes that the town's creeks form in valleys between hills and plains, the same pattern seen across central North Carolina, and that this brings flood risk to the land beside them. Abbotts Creek runs through town, and the plan proposes greenway segments and protection for the riparian ground along it and its tributary. Kernersville Lake is one of the protected water-supply watersheds Forsyth County lists, and the town's riparian buffer rules for the Jordan and Randleman Lake watersheds date to July 1, 2011.

For a well, low ground is a water quality question. A wellhead that sits in a swale or near a creek bank can end up under water in a heavy storm. NC DHHS advises leaving the pump's electricity off until flood water recedes and having a flooded well shock chlorinated. Testing comes after that, because a wellhead that has been under water can let contaminants in.

Breakdowns that bring us out to Kernersville

No water at all

Start with the breaker. A dead circuit, burned pressure switch contacts, or a control box hit by a surge can all leave a healthy pump sitting idle. A pump that runs with no water arriving points down the well instead, to a split drop pipe or a water level pulled below the intake.

Pressure that surges and sags

A waterlogged pressure tank sends the pump through short, rapid cycles. A switch with a plugged sensing tube can do something similar. Both wear the motor faster than normal use would.

Water that changed

New staining, a rotten-egg smell, or cloudiness after rain are signs to test, not to guess. Iron stains orange, manganese stains black, and hydrogen sulfide brings the smell.

Who signs off on well work in Forsyth County

For a Kernersville address in Forsyth County, private wells are handled by the Forsyth County Department of Public Health's Environmental Health Division. State law lists the jobs that need a certified well contractor present: building, repairing, altering, or abandoning a well; breaking its seal; disinfecting after pump work; extending casing; and hydrofracturing. Our state certification is number 2453-A.

A permit is a separate question. A new pump, a new tank, or routine upkeep with the seal left closed goes ahead without one. Work on the bore or casing can be different, and we settle that question before starting.

Either way, NC DHHS wants the water retested once any part of the well system has been fixed or swapped.

Small well house beside a vegetable garden behind a farmhouse

I-40, US 421, or NC 150 from Greensboro

On a map, the town center lies roughly 16.1 miles west of Greensboro in a straight line. Three routes connect the two, I-40, US 421, and NC 150, and all of them run through town and on into Guilford County. Triad Park, which Forsyth and Guilford manage together, is on the east side of the community, the side we approach from.

We book visits from Monday to Friday, 8am to 5pm. On Saturday or Sunday, text or ring (336) 613-4314 with a short note about the trouble.

Six services, matched to the trouble

Find the line that matches what your system is doing.

  • Well pump repair for a pump that trips breakers, hums without pumping, or quits after a storm.
  • Well pump replacement when a motor winding has failed or the pump has worn out inside.
  • Pressure tank replacement for a tank that has lost its charge or rusted through.
  • Emergency no-water service when nothing comes out of the tap.
  • Well and casing repair for cracked casing, a wellhead buried below grade, or a cap that no longer seals.
  • Well water treatment for iron, manganese, odor, and hardness, sized from a lab report.

ZIP code we cover around Kernersville: 27284.

What Kernersville well owners ask

Still stuck? (336) 613-4314

My lot is zoned RS-40. Does that mean my house is on a well?

Not necessarily. The town intends RS-40 for areas without public water and wastewater, but lines and zoning don't always line up parcel by parcel. The quickest check is your utility bill. If no water charge comes from Winston-Salem/Forsyth County Utilities and there is a pressure tank somewhere in the house, you are on a well.

Who sets the minimum lot size for a new house on a well here?

Where public or community water and wastewater are not available, the town's development ordinance gives that job to the Public Health Department. Its number can't drop below 20,000 square feet, and it can't drop below the district's own minimum either. An AG or RS-40 lot already starts at 40,000 square feet, just under an acre.

Some of Kernersville reaches toward Guilford County. Which health department covers my well?

The health department follows the county your property is in. A lot inside Forsyth County goes to the Forsyth County Department of Public Health. A property on the Guilford side of the county line would go to Guilford County's health department instead. Your tax bill names your county if you are unsure.

Our yard flooded near the creek. Can we drink the well water?

Hold off. NC DHHS guidance is to keep the pump switched off at the breaker until the water drops, and then get the well shock chlorinated. After that, a lab test tells you whether the water is safe. A wellhead that sat under water can take in surface water, and you can't see or taste bacteria.

Will the new town plan bring public water to my road?

A long-range town plan sets direction. It doesn't promise a main on any particular street. The 2026 plan points the town toward joint work with the county utility on water and wastewater, and it still carries a Rural Residential category for big parcels with no public service. Until a line reaches you, the well is your water supply.

Who is allowed to work inside my well?

Opening the well seal, disinfecting after pump work, and repairing or altering the well all require a state-certified well contractor on site. Ask whoever you hire for that number before any work starts, and expect a straight answer. Ours is 2453-A.

What leaves blue-green stains in a tub or sink?

Low pH water, which slowly corrodes copper pipe and leaves blue-green streaks on sinks and tubs. NC DHHS lists low pH among the common problems in North Carolina wells. A lab test gives you the pH number, and a neutralizing filter can raise it once you know where it stands.

How do you tell a bad pump from a bad pressure switch?

Sometimes it takes a meter to tell. A switch with burned contacts or a plugged tube can mimic a dead pump. We check power and the switch first, then the control box if your pump has one, and only then take readings on the wire going down the well. Please don't open the switch cover yourself.

Good references

Official pages we point homeowners to. They open in a new tab.

No water, low pressure or bad taste?

Call or text. Monday to Friday, 8am to 5pm. Saturday and Sunday: call or text.