Well Water Testing in the Piedmont Triad

Well water testing is how you find out what is really in your water, since many of the things that can make you sick have no taste, smell, or color.

Water sample bottles on a kitchen counter beside the sink

We take samples the way the lab requires and send them to a certified lab. When the results come back, we walk you through them line by line, in words that make sense.

After the first test, the schedule is up to you

In North Carolina, a new well gets one required test. Within 30 days of issuing a certificate of completion, the local health department must sample it, either testing the water itself or seeing that a certified lab does, for a long list that runs from arsenic and lead to manganese, nitrates, pH, and bacterial indicators. After that, North Carolina's health department says, no other tests are required for a private well.

Virginia's Department of Health leaves no doubt about whose job it is: testing falls to the homeowner.

It is easy for a well to go years without well water testing of any kind, especially after a house changes hands a time or two. The water can look exactly the same the whole time.

How often to test, sorted by the calendar

The agencies do not agree word for word, but they line up closely. Here is their advice sorted by how often each test comes around.

Every year

Bacteria first. North Carolina's Department of Health and Human Services names total and fecal coliform. NC State Extension and the EPA both add nitrate, pH, and total dissolved solids to the yearly list. Virginia's Department of Health simply recommends a test every year.

Every two years

North Carolina's health department puts heavy metals here, along with nitrates, nitrites, lead, and copper.

Every three years

NC State Extension schedules sulfate, chloride, iron, manganese, lead, and hardness on a three-year cycle.

Every five years

Pesticides and volatile organic compounds, per North Carolina's health department. If a particular pesticide is being sprayed close by, it moves to the yearly list.

In Virginia, the health department recommends treatment or a different water source when a contaminant tops the EPA's primary drinking water limits.

Times to test outside the regular schedule

  • After any repair or replacement. North Carolina's health department calls for a test after work on any part of the well, since contaminants can slip in while it is open. NC State Extension says the same about repairing or replacing a well or pump.
  • After a flood. If water got over the wellhead, assume the well took some in. Test once the well has been disinfected and the chlorine is gone.
  • When something changes. The EPA wants a test right away when the taste, color, or smell shifts, or when conditions around the well change in a big way.
  • Before you buy. Once you close, whatever is in the water is yours.

One timing note: never sample right after a shock chlorination. Leftover chlorine kills bacteria in the bottle and gives you a clean result that means nothing. Wait until the chlorine has been fully flushed out.

Smells, stains, and the tests they point to

Some problems announce themselves. When they do, the symptom tells the lab where to look.

  • Rotten-egg smell. Usually hydrogen sulfide. Ask about sulfate and sulfate-reducing bacteria too.
  • Orange or rust-colored stains. Iron, sometimes with iron bacteria, which leave a slimy orange film where water sits.
  • Black or brown-black stains. Manganese, and often iron along with it.
  • Blue-green stains. Acidic water eating at copper lines. Test pH, copper, and lead.
  • Metallic or bitter taste. Iron, manganese, or low pH.
  • Salty taste. Chloride and sodium.
  • Cloudy or gritty water. Turbidity and sediment, which can point to a well problem as much as a water problem.

Manganese earns its own mention here. North Carolina's health department ranks Piedmont counties first in the state for average manganese. Its fact sheet uses an aesthetic standard of 0.05 mg/L, the level meant to keep water from tasting bitter and metallic or leaving brown-black stains. If you see black specks or dark gray stains, ask for manganese by name.

How a proper sample gets taken

A sloppy sample gives a wrong answer, and the most common wrong answer is a false positive for bacteria. The rules are simple. They just have to be followed.

  1. Use the bottle the lab provides. Do not rinse it; some bottles hold a small amount of chemical that neutralizes chlorine.
  2. Pick a cold-water tap with no swivel spout and no hose attached. If you want to know what the well itself produces, use one on the well side of any filter or softener.
  3. Take off the aerator if there is one, and clean the mouth of the tap.
  4. Run the cold water several minutes to clear out what has been sitting in the pipes. For lead and copper, the lab may want the opposite: the first water out after it sits overnight.
  5. Open the bottle without touching its rim or the underside of the cap, fill it to the line, and close it right away.
  6. Keep it cool and get it to the lab within its time limit. Bacteria samples have a short window.

The lab's own instructions win over this list every time.

Your county health department samples wells too

You do not have to go through a private company. In North Carolina, county health departments run the local private well programs and enforce the state rules. The state's own guide to choosing a treatment system tells owners to contact the county private well program for testing and calls it the most reliable source. In Virginia, the Department of Health keeps a list of accredited labs.

We are another route, not a replacement. Where we help most is on either side of the bottle: taking the sample correctly when you would rather not, and explaining the report when it arrives. If you already have results from the county or another lab, bring them to us and we will go through them with you.

Making sense of the lab report

Lab reports are written for chemists. Here is what the columns mean.

  • Units. Milligrams per liter, written mg/L, are the same as parts per million. Some metals come back in micrograms per liter, which is parts per billion, a thousand times smaller.
  • ND, or a "less than" sign. Not detected, or below what the test can measure.
  • Two kinds of limits. Some limits protect health. Others cover taste, odor, and staining. A result over a health limit needs action. A result over an aesthetic limit is a nuisance you may or may not want to treat.
  • Present or absent. Bacteria results usually come back as one or the other, not as a number.
  • pH. Neutral sits in the middle of the scale. Lower readings mean acidic water, the kind that pulls copper and lead out of pipes.

When we go through a report with you, we take each line in turn: what it is, whether it matters at that level, where it likely comes from, and what, if anything, to do about it. Sometimes the answer is to fix the well cap and retest. Sometimes it is treatment. Sometimes it is nothing at all.

What can build up while a test keeps getting put off

Nothing about a well's water stays fixed. A cap cracks, a casing seal settles, a septic system uphill starts to fail, and bacteria or nitrate find a way in. Without a test, the first sign may be a stomach bug that keeps going around the house, or no sign at all.

Metals like lead and arsenic give no warning either. There is no taste to tip you off, and the exposure adds up over years. Meanwhile, owners who skip the test tend to buy treatment equipment on a guess, then wonder why the stains came back. The longer a problem goes unmeasured, the longer you live with it before anyone knows its name.

How a sampling visit works

Call (336) 613-4314 and tell us why you want the test: a home sale, a smell, a stain, a repair, or just the yearly check. That decides which tests get ordered, and the right list matters more than a long one.

On the visit, we pick the sampling tap, fill the bottles the way the lab wants them, and note anything at the wellhead worth mentioning, like a loose cap or standing water against the casing. The samples go to a certified lab. When the results come back, we go over them with you by phone or in person and tell you what, if anything, we would do next.

What is your water doing?

Pick what you are seeing. These are common causes, not a diagnosis. A lab test is the only way to know.

Smells like rotten eggs

Usually hydrogen sulfide gas or sulfur-reducing bacteria in the well. It is unpleasant more than dangerous at the levels most homes see, but it can corrode metal and it tells you something in the well has changed.

What to test for: Hydrogen sulfide, sulfate and a bacteria test

Well Water Treatment Systems

Well Water Testing: common questions

Still stuck? (336) 613-4314

Are hardware store test kits good enough?

For a quick look at hardness or pH, they can point you in a direction. For bacteria, nitrate, lead, and anything you plan to act on, use a certified lab. Store kits are hard to read and easy to contaminate. North Carolina's health department calls for a certified lab on the yearly bacteria check, and Virginia's health department steers owners to accredited labs as well.

My water tastes fine. Why test it?

Because taste is a poor judge. Coliform bacteria and nitrate leave water looking, smelling, and tasting exactly as it always has, and both can turn up in a well that seemed fine for years. Every agency listed on this page calls for testing at least once a year. The metals tests can wait longer between rounds, but they should not be skipped forever.

The lab found coliform bacteria. What now?

Coliform bacteria are an indicator group. Finding them means a path exists for surface water or soil to reach your water. If the lab also finds E. coli, the source includes human or animal waste, and nobody should drink the water until the well has been disinfected and retested clean. Then the path has to be found and closed: a cap, a casing crack, or poor grading.

Should I sample before or after my softener or filter?

It depends on the question. To learn what the well is producing, sample ahead of any treatment, often at a tap near the pressure tank. To find out whether your equipment is working, sample after it. When a system is new, testing both spots at once gives the clearest picture, since the difference between them is what the equipment removed.

If my water has lead, is it coming from the well?

Usually not from the rock. Lead more often comes from older pipes, solder, and brass fittings, and acidic water pulls it out more quickly. That is why lead tests are often done on the first water out after it sits overnight, and why a pH result matters next to a lead result. Correcting the pH can lower lead at the tap, but any result over the health limit needs a retest and a plan.

What should a home buyer test for?

At minimum, coliform bacteria and nitrate. We usually suggest a metals panel too, covering lead, arsenic, iron, and manganese, plus pH. North Carolina's health department lists all of those among the problems it finds too often in the state's wells. Ask your lender and agent whether they need specific tests or a specific lab, and leave enough time in the contract for results to come back.

How long do lab results take?

It depends on the lab and the test. Bacteria tests need time to incubate, so they are never instant, and metal and mineral panels can take longer. If you are working against a closing date or need the water cleared after a repair, tell us when you call so we can time the sample around the lab's schedule.

How often should I retest after installing treatment equipment?

Test once soon after the system goes in, to confirm it does what it was sold to do. North Carolina's health department recommends exactly that in its treatment guide. After that, keep up the yearly bacteria test and recheck the problem item, such as iron or pH, on a schedule that fits the equipment. If stains or odors return early, test sooner.

Good references

Official pages we point homeowners to. They open in a new tab.

No water, low pressure or bad taste?

Call or text. Monday to Friday, 8am to 5pm. Saturday and Sunday: call or text.