You just own the water system along with the roof and the driveway, and nobody hands you a manual at closing. Before you sign, a few pointed questions and one proper inspection will show you what you are taking on.
Questions to put to the seller in writing
Ask early, and ask in writing, so the answers end up in your file instead of in somebody's memory.
- When was the well built, and who built it?
- Is there a well permit, a well record, or a certificate of completion?
- When were the pump and the pressure tank last replaced?
- Are there recent water test results, with the lab's name and the date?
- Is there treatment equipment, what does it treat, and when was it last serviced?
- Has the well ever run short in a dry summer, or needed work on the casing or cap?
- Is the well shared with a neighbor?
Vague answers are common and not a red flag on their own. Plenty of owners never knew. A seller who does have records is handing you a head start.
Finding the well permit and county records
North Carolina law requires every county to run a program for permitting, inspecting, and testing private wells that were built, repaired, or abandoned on or after July 1, 2008. County health departments enforce those rules. A well from that period should have a permit on file and a certificate of completion, since a new well cannot go into service until that certificate is issued.
There may be a water test in the file too. Within 30 days of issuing the certificate for a new well, the health department has to test the water or make sure a certified lab does. Call the county environmental health office with the property address and ask what they have.
Older wells often have no file at all. That is normal, not a warning sign. It just means the inspection and the water test carry more weight. If you are also looking across the state line in Danville or Martinsville, Virginia requires a written permit to construct, alter, abandon, or deepen a private well for work done after November 6, 2024.
What a real well inspection covers
A general home inspection may only glance at the pressure tank and run a tap. That is not a well inspection. A proper one looks at the whole system.
- The wellhead. Casing at least 12 inches above ground, a cap that is tight and intact, and ground that slopes away from the well.
- The pump. How it performs under load, and how hard the motor works to do it.
- The tank and switch. Air charge, switch settings, and whether the pump runs a healthy cycle or short cycles.
- Wiring and controls. The condition of the pressure switch, the control box if there is one, and the connections.
- A drawdown and recovery test. The well is run steadily for a while, then watched as it comes back. That tells you more about August than any seller's memory.
The yearly checkup list from the National Ground Water Association makes a good outline for a purchase inspection too. Book it early in your due-diligence period, because lab results and any follow-up take time.
Water tests to order before closing
Start with bacteria: total coliform and E. coli. Add nitrate and nitrite, pH, and the metals NC DHHS flags most often. The department says many North Carolina wells have too much lead, arsenic, iron, and manganese, along with low pH and harmful bacteria. Its manganese fact sheet adds that Piedmont counties had the highest average manganese levels in the state.
For the full menu, borrow the list North Carolina requires on brand-new wells: arsenic, barium, cadmium, chromium, copper, fluoride, lead, iron, magnesium, manganese, mercury, nitrates, nitrites, selenium, silver, sodium, zinc, pH, and bacterial indicators.
If the house has a softener or filter, take one sample before the equipment and one after. The first shows what the well really delivers. The second shows whether the equipment is doing its job.
Findings that should change the conversation
Few well problems should kill a deal outright. Most give you something specific to put in a repair request. The ones worth raising:
- Casing that ends below ground, sits in a pit, or is buried under a flower bed. North Carolina does not allow a well to be repaired so the wellhead ends up less than 12 inches above land surface, and raising it is work for a certified well contractor that may need a county permit.
- A positive bacteria result or high nitrate.
- A cracked or missing cap.
- Short cycling or a waterlogged tank.
- A drawdown test where the well falls behind and recovers slowly.
- Treatment equipment nobody can explain.
If you want us to look at a well before closing, call (336) 613-4314 and give us the address and your closing date.