Well service in High Point means keeping a private well going about 14.4 miles southwest of our Greensboro office as the crow flies, on lots the city's lake-fed lines never reached.
What the city system covers, and what it does not
The City of High Point supplies public water. Its 2025 water quality report says most of it is pumped from Arnold Koonce City Lake and treated at the Ward Water Plant on Pendleton Street, with Oak Hollow Lake and City Lake holding the supply. During 2025 the city also bought water from the Piedmont Triad Regional Water Authority and from Davidson Water Inc.
None of the city's own reporting describes private wells inside its limits, and we have no count to offer. Guilford County's 2025 plan says the county's highest densities are in its two largest cities and that homes thin out moving away from them. The farther out you go, the more likely the water comes up out of your own yard.
The ZIP codes are a little tangled. The street ZIPs are 27260, 27262, 27263, and 27265, and 27263 is centered more on Randolph County than on Guilford. A mailing address with the city's name on it can put you in either county.
Headwaters country on the Deep River
The city draws from a 62-square-mile watershed at the top of the Cape Fear River system. Streams there run together to form the east and west forks of the Deep River. The regional authority that sold the city water in 2025 pulls from Randleman Reservoir, built where Muddy Creek meets the Deep River, holding about 18.3 billion gallons.
Your well has nothing to do with those lakes. It draws from water stored in cracks in the bedrock, under a layer of weathered rock and soil. What the creeks do matter for is the wellhead. A casing that sits in a low spot near one of those headwater streams can take on surface water in a hard rain, and that is how bacteria get in. State rules call for the casing to end at least 12 inches above the ground and for the ground to slope away from it.
Where wells on the city's outskirts give trouble
Pressure that fades
A pressure switch decides when the pump runs and when it rests, usually set at 30/50 or 40/60 psi. Its contacts burn and pit with age, and the pump starts lagging. You notice it in the shower first.
Air in the lines and a sputtering tap
Spitting taps can mean a cracked drop pipe, a failing check valve, or water in the well dropping close to the pump intake. Each one has a different fix, so we find out which before we pull anything.
Water that smells like rotten eggs
That is hydrogen sulfide. The USGS notes that iron, manganese, and sulfate turn up at objectionable levels in parts of the Piedmont. A lab test points to the right treatment.
Permits and testing: Guilford County, or maybe Randolph
For a High Point home in Guilford County, Guilford County Environmental Health handles well permits and water sampling. Since July 2, 2026, that office has worked under the state's well rules. A state law signed that day, Session Law 2026-32, ended local drinking water well rules across North Carolina, and Guilford's own were repealed. The county still issues permits and inspects; the standards are now the state's.
The county's testing works like this. Staff come to the house, check the well, and take the samples. Bacteria samples go to the county Public Health Laboratory, with results usually toward the end of the week they were collected. Other samples go to the State Public Health laboratory in Raleigh and take about four to six weeks.
If your well sits on the Randolph side of the line, the Randolph County health department is your permit office instead.

Coming down I-85 and NC 68
We come in from Greensboro on I-85 or NC 68, depending on which side of the city you are on. The same trip covers Jamestown, Archdale, Colfax, Trinity, and Thomasville.
The office runs Monday to Friday, 8am to 5pm. Saturday and Sunday, call or text (336) 613-4314. It helps to know whether your pump is in the well or sitting above ground, and how old the pressure tank is, if you have any idea. Tell us your ZIP code, too, so we know which county's office covers the well.
The six core services, as they apply here
Pump repair comes first, and it is mostly detective work on switches, control boxes, and wiring. When a pump is past saving, we replace it, submersible or jet, and disinfect the well once the new one is in. Pressure tank replacement fixes the short cycling that chews up switches. A no-water call on a weekend goes through the call-or-text line. Casing and well repair covers cracked or low casing, loose caps, and liners. Water treatment comes after the lab results, never before.
ZIP codes we cover around High Point: 27260, 27262, 27263, 27265.