Well Service in Elon, NC

Homes beyond the Elon town lines rely on private wells, and those wells are where our work begins. The town's water now comes from Burlington under contract.

Map: Elon, NC in relation to GreensboroElonGreensboro16.1 miBurlingtonWhitsettGrahamGUILFORD
Town
Elon, NC
County
Alamance County
From our Greensboro office
16.1 miles, straight line
Open Elon in Google Maps

The name Elon is Hebrew for oak, a fit for the wooded ground where Elon College opened in 1890, and the town carried the school's name until 2001.

Mill Point, Boon's Crossing, and the oaks

In 1881 a depot went up where the Goldsboro-to-Charlotte rail line crossed a dirt road. The railroad called the stop Mill Point, a shipping point for cotton mills in the countryside around it, and locals called it Boon's Crossing. A post office followed in 1888, and the college opened in 1890 in a heavily wooded stand of large oaks. The town says it covers about 6 square miles today.

Water bought from Burlington, and the town's land rules

The town buys its water from the City of Burlington under a regular contract for 1.6 million gallons per day, with an emergency connection to Gibsonville. NC DEQ's 2025 plan counts 11,520 people served, all in Alamance County and all in the Haw River sub-basin. Inside town limits and in the extraterritorial jurisdiction, development falls under Elon's Land Management Ordinance, and building permits are reviewed by the town, then processed by Alamance County.

Well permits are a county matter. Alamance County Environmental Health issues repair and abandonment permits for wells and checks setback distances, and the county does not run a public water system.

Testing well water after the first test

North Carolina requires the health department to test a new well within 30 days of its certificate of completion, for a long list that includes arsenic, lead, iron, manganese, nitrates, pH, and bacterial indicators. After that, the schedule is yours. NC State Extension suggests testing for coliform bacteria, nitrate, pH, and total dissolved solids every year and after any repair, and for sulfate, chloride, iron, manganese, lead, and hardness every three years. We read the report with you line by line and match any treatment to the numbers.

NC 100 through Gibsonville and Whitsett, and our hours

Elon is about 16.1 miles east of Greensboro measured straight across. NC 100, which becomes Haggard Avenue and University Drive in town, runs west through Gibsonville and Whitsett toward Greensboro, and I-40/I-85 passes south of town in Burlington. Weekday office hours are 8am to 5pm. Text or phone (336) 613-4314 on weekends.

White farmhouse with a small well house and a clothesline in the yard

ZIP code we cover around Elon: 27244.

What Elon well owners ask

Still stuck? (336) 613-4314

Where does Elon's town water come from?

The City of Burlington, under a regular contract for 1.6 million gallons a day, with an emergency link to Gibsonville. A well draws on fractures in the rock under your lot instead, with no city system involved.

Who issues building and well permits in Elon?

Building permits are reviewed by the town and then processed by Alamance County. Well permits for repair or abandonment come from Alamance County Environmental Health. Replacing a pump or pressure tank needs no repair permit in North Carolina.

What ZIP code is Elon?

27244 covers the town. Private wells there are on our list, along with those in Gibsonville, Burlington, Whitsett, Graham, and McLeansville, the closest towns we also serve. NC 100 is our usual road in from Greensboro.

Was my Elon-area well tested when it was built?

If it was built on or after July 1, 2008, the health department should have tested it within 30 days of the certificate of completion. Ask Alamance County Environmental Health for the results. An older well may never have had a test, which is reason enough to get one now.

What is the difference between hard water and iron water?

Hardness comes from calcium and magnesium, which leave white scale and fight soap. Iron leaves orange stains and a metallic taste. A softener handles hardness and small amounts of iron; heavier iron or manganese needs its own filter. A lab test tells you which you have.

Can my pressure switch be adjusted for better pressure?

Sometimes. A switch set at 30/50 can often move to 40/60 if the pump can reach it and the tank pre-charge is reset to match, about 2 psi below the new cut-in. It is a job for us, not a homeowner, because the switch carries line voltage.

My water smells like chlorine after your visit. Is that normal?

Yes, for a little while. North Carolina requires the well to be disinfected after pump work, at a strong dose that stands for at least 24 hours. The well is then pumped until no chlorine shows. If the smell lingers after that, call us.

How often should a well be looked over?

Yearly is the usual answer. NC DHHS suggests an owner check the wellhead for cracks or openings every year, and a yearly look at the pump, tank, switch, and water by a professional catches small problems before they become a no-water morning.

Good references

Official pages we point homeowners to. They open in a new tab.

No water, low pressure or bad taste?

Call or text. Monday to Friday, 8am to 5pm. Saturday and Sunday: call or text.